Release History > Release Notes PTV xServer 1.16

Release Notes PTV xServer 1.16

PTV xCluster Server

1.16.0.1

Improvement: Update to JDK 1.6.0_39 to fix critical security leaks.
Improvement: Redundant $type attributes are silently ignored in JSON requests.
Bug Fix: CORS works properly with Internet Explorer 8/9.
Bug Fix: CXF client no longer ignores increased timeout settings.

1.16.0.0

Feature: All PTV xServer have REST-RPC/JSON web service entry points.
Improvement: The Raw Request Runner can now convert SOAP requests and responses to JSON and vice versa.
Improvement: Scheduling of waiting requests is optimised to better utilise available CPUs.
Improvement: RMI registry ports are automatically assigned during startup and no longer need configuration.
Bug Fix: Requests in the waiting queue can no longer be overtaken.
Bug Fix: Average request waiting and computation times are now measured correctly in multi-CPU setups.

PTV xDima Server

1.16.0.2

Improvement: Improved performance of export of large distance matrices.

1.16.0.1

Improvement: Update to JDK 1.6.0_39 to fix critical security leaks.
Improvement: Redundant $type attributes are silently ignored in JSON requests.
Bug Fix: CORS works properly with Internet Explorer 8/9.
Bug Fix: CXF client no longer ignores increased timeout settings.

1.16.0.0

Feature: 64-bit xDima version is available.
Feature: All PTV xServer have REST-RPC/JSON web service entry points.
Improvement: The Raw Request Runner can now convert SOAP requests and responses to JSON and vice versa.
Improvement: Scheduling of waiting requests is optimised to better utilise available CPUs.
Improvement: Improved locking of distance matrices when being accessed from more than one (module) process. While calculating a distance matrix another process cannot access it. Please note that distance matrices written by xDima or xTour from 1.16.0.0 must not be read by older versions.
Improvement: RMI registry ports are automatically assigned during startup and no longer need configuration.
Bug Fix: Requests in the waiting queue can no longer be overtaken.
Bug Fix: Average request waiting and computation times are now measured correctly in multi-CPU setups.

PTV xLocate Server

1.16.0.4

Bug Fix: Fixed word separator chars for native profiles.

1.16.0.3

Bug Fix: Fixed detailLevelDescription for long postal codes.

1.16.0.2

Improvement: Update to JDK 1.6.0_39 to fix critical security leaks.
Improvement: Redundant $type attributes are silently ignored in JSON requests.
Bug Fix: CORS works properly with Internet Explorer 8/9.
Bug Fix: CXF client no longer ignores increased timeout settings.

1.16.0.1

Bug Fix: The xLocate WSDL File was broken and the interface type Point is now resolved correctly. This problem only affects the client generation via WSDL. It does not affect the xLocate functionality itself.

1.16.0.0

Feature: 64-bit xLocate version is available.
Feature: All PTV xServer have REST-RPC/JSON web service entry points.
Improvement: The Raw Request Runner can now convert SOAP requests and responses to JSON and vice versa.
Improvement: Scheduling of waiting requests is optimised to better utilise available CPUs.
Improvement: Increased the search efficiency of frequent terms e.g. affixes in order to improve the search performance.
Improvement: findSuggestion considers country code and state.
Improvement: A street section that matches to house number input is preferred over a street section that matches the postcode input.
Improvement: If the first city input word matches the first town result word, a score bonus is added.
Improvement: Introduced new profile parameter that prefers postcode input for the search: Postcode.Prefer
Improvement: HouseNr.Classification and Street.Classification are taken into account for the result sorting order.
Improvement: RMI registry ports are automatically assigned during startup and no longer need configuration.
Bug Fix: Serbian special characters are now transformed in the search indices.
Bug Fix: Requests in the waiting queue can no longer be overtaken.
Bug Fix: Average request waiting and computation times are now measured correctly in multi-CPU setups.
Bug Fix: Fixed excessive memory allocations on searching special addresses.
Bug Fix: Fixed memory leak when using invalid ReverseSearchOption.RESULT_LANGUAGE in findLocation.

PTV xMap Server

1.16.0.3

Bug Fix: Fixed PTV xServer internet specific token handling problem (WMS Servlet).

1.16.0.2

Feature: Additional configuration for the width of inner lines of borders depending on the scale.

1.16.0.1

Improvement: Update to JDK 1.6.0_39 to fix critical security leaks.
Improvement: Redundant $type attributes are silently ignored in JSON requests.
Bug Fix: Rendering works with big coordinates.
Bug Fix: CORS works properly with Internet Explorer 8/9.
Bug Fix: CXF client no longer ignores increased timeout settings.

1.16.0.0

Feature: 64-bit xMap version is available.
Feature: All PTV xServer have REST-RPC/JSON web service entry points.
Improvement: The Raw Request Runner can now convert SOAP requests and responses to JSON and vice versa.
Improvement: Scheduling of waiting requests is optimised to better utilise available CPUs.
Improvement: Increased maximum default image size to 3840x2400 (4x1920x1200).
Improvement: RMI registry ports are automatically assigned during startup and no longer need configuration.
Bug Fix: Crash with the free type labeller if font sizes are positive.
Bug Fix: Parts from rivers are not overlapped through background areas.
Bug Fix: RoadEditorLayers will again be displayed even if a rendering profile is used.
Bug Fix: Requests in the waiting queue can no longer be overtaken.
Bug Fix: Average request waiting and computation times are now measured correctly in multi-CPU setups.

PTV xMapmatch Server

1.16.0.1

Bug Fix: Fixed two bugs that caused a crash of the PTV xMapmatch Server backend module.
Bug Fix: PTV xMapmatch Server provides a response on the border to Luxembourg.

1.16.0.0

Feature: 64-bit xMapmatch version is available.
Feature: All PTV xServer have REST-RPC/JSON web service entry points.
Feature: TrackPosition and MatchedLocation have a new attribute: coordinate. The coordinate can have several coordinate formats defined in the CallerContext of the request.
Improvement: The Raw Request Runner can now convert SOAP requests and responses to JSON and vice versa.
Improvement: Scheduling of waiting requests is optimised to better utilise available CPUs.
Improvement: Added a new license for the reporting of speed limits based on the specified maximum network class.
Improvement: RMI registry ports are automatically assigned during startup and no longer need configuration.
Bug Fix: No more crashes on the IRL-UK border.

PTV xRoute Server

1.16.0.4

Bug Fix: Fixed some issues on tunnel restriction codes (ADR-blockings ignored, missing restrictions in data).
Bug Fix: With calculate(Advanced)Tour and 2 or more identical waypoints in a sequence, the accTime attribute of the second now contains the service period of the first and so on.

1.16.0.3

Improvement: Support of EURO_7.
Bug Fix: Fixed bug toll calculation on Tauern motorway.

1.16.0.2

Improvement: Update to JDK 1.6.0_39 to fix critical security leaks.
Improvement: Redundant $type attributes are silently ignored in JSON requests.
Bug Fix: Fixed bug in toll calculation where toll could not be calculated if a certain toll scenario was chosen.
Bug Fix: Fixed bug in matrix calculation. Banned turns at the start or destination segments have been evaluated wrongly.
Bug Fix: Properties for routing violations are evaluated correctly.
Bug Fix: Toll is correctly calculated if the weight of the vehicle is greater than 65t or the trailer weight is greater than 65t.
Bug Fix: Big isochronous horizons can lead to memory exhaustion. The internal error handling was improved. The method calculateIsochrones returns an error status if memory exhaustion was detected during the construction of the response.
Bug Fix: Toll calculation in Switzerland ignores fractional part of vehicle weight value.
Bug Fix: CORS works properly with Internet Explorer 8/9.
Bug Fix: CXF client no longer ignores increased timeout settings.

1.16.0.0

Feature: 64-bit xRoute version is available.
Feature: All PTV xServer have REST-RPC/JSON web service entry points.
Feature: Emissions according to the Australian NGA can be calculated.
Feature: Emissions according to the French CO2 decree can be calculated.
Feature: New method calculateAdvancedTour with improved tour calculation including more restrictions, more detailed tour events and more comprehensive break and rest rules based on the current EU regulations.
Feature: Routing with segment violations, i.e routing in blocked zones.
Improvement: The Raw Request Runner can now convert SOAP requests and responses to JSON and vice versa.
Improvement: Scheduling of waiting requests is optimised to better utilise available CPUs.
Improvement: Customers can use the routing in blocked zones feature also for general BlocksTruck Violations.
Improvement: RMI registry ports are automatically assigned during startup and no longer need configuration.
Bug Fix: Fixed bug with low emission zone type in segment attributes - wrong code for NO low emission zone used.
Bug Fix: Fixed bug in toll calculation caused by sections without toll flags.
Bug Fix: Fixed bug in toll calculation caused by the named toll was too high in some cases.
Bug Fix: The dynamic routing with patterns over time (Ganglinien) uses country-specific time stamps instead of the global time stamp.
Bug Fix: Requests in the waiting queue can no longer be overtaken.
Bug Fix: Average request waiting and computation times are now measured correctly in multi-CPU setups.
Bug Fix: Routing with segment violations. Use common violation types. Changed RoutingParameter names and the return value.
Bug Fix: Method calculateMatrixInfo sets RouteInfo.hasViolations if routing with segment violations is enabled.
Bug Fix: Toll calculation in Switzerland ignores fractional part of vehicle weight value.

Caution: The files data/cen2011.ptv and data/cen2012.ptv have been combined into data/emissionFactors.ptv.

PTV xTour Server

1.16.0.3

Improvement: Primitive multiple client capability due to new dima configuration parameters: forceDeleteDimaBeforeAndAfterUsage and useInstanceNumberSpacesForDimaIds.
Bug Fix: Unscheduled order analysis works for planSequence(), if no orders can be planned.

1.16.0.2

Bug Fix: Violations at start or end depot are now set correctly.
Bug Fix: Tour period estimation for vehicle scheduling is more optimistic now.
Bug Fix: Insertion algorithm in tour reduction step crashed on certain circumstances.

1.16.0.1

Improvement: Update to JDK 1.6.0_39 to fix critical security leaks.
Improvement: Redundant $type attributes are silently ignored in JSON requests.
Bug Fix: Trailer (resp. Truck) search in VehicleIterator now returns all possible train instances.
Bug Fix: Tour elimination algorithm considers now all fixations.
Bug Fix: CORS works properly with Internet Explorer 8/9.
Bug Fix: CXF client no longer ignores increased timeout settings.

1.16.0.0

Feature: 64-bit xTour version is available.
Feature: All PTV xServer have REST-RPC/JSON web service entry points.
Feature: Using new time calculator and changed TimeEvents to TourEvents.
Feature: Planning driver breaks and rests in accordance with EU driver regulations.
Feature: Alternative Maximum Quantity Patterns.
Feature: Break rule can be described as xx minutes within an interval [FROM, TILL].
Feature: Integration of high-performance routing networks (special license needed).
Feature: Tool for generation of high-performance routing networks (RoutingNetworkGenerator).
Feature: Integration of RoadEditor support by profile (special license needed).
Improvement: The Raw Request Runner can now convert SOAP requests and responses to JSON and vice versa.
Improvement: Scheduling of waiting requests is optimised to better utilise available CPUs.
Improvement: Improved locking of distance matrices when being accessed from more than one (module) process. While calculating a distance matrix another process cannot access it. Please note that distance matrices written by xDima or xTour from 1.16.0.0 must not be read by older versions.
Improvement: Added some more example configurations of log4j to server-logging.properties.
Improvement: RMI registry ports are automatically assigned during startup and no longer need configuration.
Bug Fix: Requests in the waiting queue can no longer be overtaken.
Bug Fix: Average request waiting and computation times are now measured correctly in multi-CPU setups.
Known Issues: Truck attributes have to be configured manually in the RoutingNetworkGenerator.

PTV xServer bundle

1.16.0.3

Includes: PTV xLocate Server 1.16.0.3
Includes: PTV xMap Server 1.16.0.1
Includes: PTV xMapmatch Server 1.16.0.0
Includes: PTV xRoute Server 1.16.0.3
Includes: PTV xTour Server 1.16.0.2 (windows only)
Includes: PTV xServer add-on AJAX Maps 2.9.5.1
Includes: Code Sample Browser 1.16.0.2

1.16.0.2

Includes: PTV xLocate Server 1.16.0.2
Includes: PTV xMap Server 1.16.0.1
Includes: PTV xMapmatch Server 1.16.0.0
Includes: PTV xRoute Server 1.16.0.2
Includes: PTV xTour Server 1.16.0.1 (windows only)
Includes: PTV xServer add-on AJAX Maps 2.9.5.1
Includes: Code Sample Browser 1.16.0.2

1.16.0.1

Includes: PTV xLocate Server 1.16.0.2
Includes: PTV xMap Server 1.16.0.1
Includes: PTV xMapmatch Server 1.16.0.0
Includes: PTV xRoute Server 1.16.0.2
Includes: PTV xTour Server 1.16.0.1 (windows only)
Includes: PTV xServer add-on AJAX Maps 2.9.5.1
Includes: Code Sample Browser 1.16.0.1

1.16.0.0

Includes: PTV xLocate Server 1.16.0.1
Includes: PTV xMap Server 1.16.0.0
Includes: PTV xRoute Server 1.16.0.1
Includes: PTV xTour Server 1.16.0.0 (windows only)
Includes: PTV xServer add-on AJAX Maps 2.9.5.1
Includes: Code Sample Browser 1.16.0.0
Bug Fix: Logging of logistic engines via log4cxx.